|
Windshield bubble repair tip

Windshield auto glass repair tip for bubble in the glass. Air shows and creates a bubble of air inside the chip. What you do to get rid of that bubble: As you are waiting for the resin to cure a little bubble starts to form, you don’t have much time at this point because the resin is setting up, the good news is there is something simple you can do to remove that bubble from the chip. Use a blunt neddle and push down on the tab, just over the exact spot of the drill hole in the windshield. Push down as the repair is hardening up, you’ll see as you push down on the tab the bubble goes away, but if you stop pushing to soon the spot will come back. Keep pushing until resin is fully hardened, then the bubble wont come back. When the repair area is hardened the pit area will be slightly down, just put a some resin and a tab on the windshield and make the chip or crack area flush. That’s how its done by the expert at Chips and Cracks windshield repair.
|
Repair Ads
|